Freeplaytech Forum

Full Version: flash masta install problem
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
Yesterday, I got flashmasta card(Neogeo Pocket & Wonderswan)....and i'm stucked at the installation step.

I'm using win7 32bits, and i didn't find a tutorial on youtube, ( https://youtu.be/i4kjkIWeOrQ )
I found out that there was a difference between what was coming out of the video and what I did.

My statue.
[attachment=632]

Youtube.
[attachment=633]

1. Driver section(Red point) is blank "(NONE)".
2. Not "Replace Driver"

help me please.
(04-04-2017, 04:12 PM)H0Jae Wrote: [ -> ]Yesterday, I got flashmasta card(Neogeo Pocket & Wonderswan)....and i'm stucked at the installation step.

I'm using win7 32bits, and i didn't find a tutorial on youtube, (https://youtu.be/i4kjkIWeOrQ)
I found out that there was a difference between what was coming out of the video and what I did.

My statue.


Youtube.


1. Driver section(Red point) is blank "(NONE)".
2. Not "Replace Driver"

help me please.

Hi,

it looks like windows doesn't recognise your unit.
Can you try it in an other computer ?

take a look at this link, it may be an USB issue, and going through a USB hub may solve your issue.
(04-04-2017, 05:17 PM)Loïc Wrote: [ -> ]
(04-04-2017, 04:12 PM)H0Jae Wrote: [ -> ]Yesterday, I got flashmasta card(Neogeo Pocket & Wonderswan)....and i'm stucked at the installation step.

I'm using win7 32bits, and i didn't find a tutorial on youtube, (https://youtu.be/i4kjkIWeOrQ)
I found out that there was a difference between what was coming out of the video and what I did.

My statue.


Youtube.


1. Driver section(Red point) is blank "(NONE)".
2. Not "Replace Driver"

help me please.

Hi,

it looks like windows doesn't recognise your unit.
Can you try it in an other computer ?

take a look at this link, it may be an USB issue, and going through a USB hub may solve your issue.

ok, i see.
I will go home and try again.
thank you for answer.
(04-04-2017, 05:41 PM)H0Jae Wrote: [ -> ]
(04-04-2017, 05:17 PM)Loïc Wrote: [ -> ]
(04-04-2017, 04:12 PM)H0Jae Wrote: [ -> ]Yesterday, I got flashmasta card(Neogeo Pocket & Wonderswan)....and i'm stucked at the installation step.

I'm using win7 32bits, and i didn't find a tutorial on youtube, (https://youtu.be/i4kjkIWeOrQ)
I found out that there was a difference between what was coming out of the video and what I did.

My statue.


Youtube.


1. Driver section(Red point) is blank "(NONE)".
2. Not "Replace Driver"

help me please.

Hi,

it looks like windows doesn't recognise your unit.
Can you try it in an other computer ?

take a look at this link, it may be an USB issue, and going through a USB hub may solve your issue.

ok, i see.
I will go home and try again.
thank you for answer.

I tried the same at home.
Sadly, it's the same state.

Device manager capture
[attachment=645]

Zadig situation
[attachment=644]


I'm using Win10 64bit OS.

Why do I come out of my computer 'winusb (v0.0.0.0)'??
I'm so confused.
Sad
In your first post, H0Jae, your second photo ( http://forum.freeplaytech.com/attachment.php?aid=633 ) showed that the usbser driver had been loaded on the WS Flash Masta. I'm not sure why Windows would have chosen this driver. Using Zadig to "replace driver" should work. I wonder if it would cause any issue for some other hardware you had used in the past.

In this photo ( http://forum.freeplaytech.com/attachment.php?aid=644 ), your system seems a bit confused. Where it says WinUSB (v0.0.0.0), can you choose anything else? The blank version number is odd. I think you wouldn't want to install that. libusb-win32 or libusbK might work well as alternative choices.

It seems that you have installed a driver in the past that took over for some reason. Zadig should help you choose the proper driver. I would try the Neo Pocket Flash Masta cartridge first.

Also, I have heard that some people have better results when they try different USB ports.

First I would try http://forum.freeplaytech.com/attachment.php?aid=644 and choosing a different driver (one that shows a version number properly). Then press the Install Driver button.

Then you can try different USB ports.

I think it would also be just fine to "Reinstall Driver" from the first screenshot. All this means is that Windows decided to install a driver for the hardware. Now you need to pick a different driver (that works with the FlashMasta software).
(04-11-2017, 02:53 AM)Flavor Wrote: [ -> ]In your first post, H0Jae, your second photo ( http://forum.freeplaytech.com/attachment.php?aid=633 ) showed that the usbser driver had been loaded on the WS Flash Masta. I'm not sure why Windows would have chosen this driver. Using Zadig to "replace driver" should work. I wonder if it would cause any issue for some other hardware you had used in the past.

In this photo ( http://forum.freeplaytech.com/attachment.php?aid=644 ), your system seems a bit confused. Where it says WinUSB (v0.0.0.0), can you choose anything else? The blank version number is odd. I think you wouldn't want to install that. libusb-win32 or libusbK might work well as alternative choices.

It seems that you have installed a driver in the past that took over for some reason. Zadig should help you choose the proper driver. I would try the Neo Pocket Flash Masta cartridge first.

Also, I have heard that some people have better results when they try different USB ports.

First I would try http://forum.freeplaytech.com/attachment.php?aid=644 and choosing a different driver (one that shows a version number properly). Then press the Install Driver button.

Then you can try different USB ports.

I think it would also be just fine to "Reinstall Driver" from the first screenshot. All this means is that Windows decided to install a driver for the hardware. Now you need to pick a different driver (that works with the FlashMasta software).

Thank you for answer.

What driver is not installed?
Please let me know what I need to install.
"Libusb, winUSB" I am so unfamiliar with these words.

I was very excited to be able to play ws, ngp games right now, but it does not work at my disposal. Sad

It is not intuitive and so difficult.
So, actually, I think I mixed things up a bit. When you posted your screenshots, I thought the "replace" was yours and the "install" was from YouTube. I understand now that yours showed "NONE" and "Install."

This is perfectly fine. Have you pressed the install button when you see this?

[Image: attachment.php?aid=632]
(04-12-2017, 01:57 AM)Flavor Wrote: [ -> ]So, actually, I think I mixed things up a bit. When you posted your screenshots, I thought the "replace" was yours and the "install" was from YouTube. I understand now that yours showed "NONE" and "Install."

This is perfectly fine. Have you pressed the install button when you see this?

[Image: attachment.php?aid=632]

See below attach images & Zadig log.
I don't know.

<<Wonderswan flash card>>

1. connect USB cable
[attachment=646]

2. install
[attachment=647]

3. error
[attachment=648]



<<Neogeo Pocket flash card>>

1. USB connect
[attachment=649]

2. install
[attachment=650]

3. error
[attachment=651]


------------------------------------------------------------------------------

zadig log

Using inf name: Neo_Pocket_Flash_Masta_USB.inf
Successfully extracted driver files.
Installing driver. Please wait...
libwdi:warning [get_version_info] unable to allocate buffer for version info
libwdi:info [extract_binaries] successfully extracted driver files to C:\Users\호재근\usb_driver
libwdi:info [wdi_prepare_driver] successfully created 'C:\Users\호재근\usb_driver\Neo_Pocket_Flash_Masta_USB.inf'
libwdi:info [wdi_prepare_driver] Vista or later detected - creating and self-signing a .cat file...
libwdi:info [CreateCat] successfully created file 'C:\Users\호재근\usb_driver\Neo_Pocket_Flash_Masta_USB.cat'
libwdi:info [RemoveCertFromStore] deleted existing certificate 'CN=USB\VID_20A0&PID_4256 (libwdi autogenerated)' from 'Root' store
libwdi:info [RemoveCertFromStore] deleted existing certificate 'CN=USB\VID_20A0&PID_4256 (libwdi autogenerated)' from 'TrustedPublisher' store
libwdi:debug [CreateSelfSignedCert] set Enhanced Key Usage, URL and CPS
libwdi:debug [CreateSelfSignedCert] created new key container
libwdi:debug [CreateSelfSignedCert] generated new keypair
libwdi:info [CreateSelfSignedCert] created new self-signed certificate 'CN=USB\VID_20A0&PID_4256 (libwdi autogenerated)'
libwdi:debug [SelfSignFile] successfully created certificate 'CN=USB\VID_20A0&PID_4256 (libwdi autogenerated)'
libwdi:info [SelfSignFile] added certificate 'CN=USB\VID_20A0&PID_4256 (libwdi autogenerated)' to 'Root' and 'TrustedPublisher' stores
libwdi:info [SelfSignFile] successfully signed file 'C:\Users\호재근\usb_driver\Neo_Pocket_Flash_Masta_USB.cat'
libwdi:info [SelfSignFile] successfully deleted private key
libwdi:debug [wdi_install_driver] using progress bar mode
libwdi:debug [installer process] got parameter Neo_Pocket_Flash_Masta_USB.inf
libwdi:debug [process_message] got request for device_id
libwdi:debug [installer process] got device_id: 'USB\VID_20A0&PID_4256\00001'
libwdi:debug [process_message] got request for hardware_id
libwdi:debug [installer process] got hardware_id: 'USB\VID_20A0&PID_4256&REV_0010'
libwdi:debug [installer process] got user_sid: 'S-1-5-21-3471256862-4293787397-2563400298-1001'
libwdi:debug [installer process] using syslog 'C:\WINDOWS\inf\setupapi.dev.log'
libwdi:debug [installer process] syslog reader thread started
libwdi:debug [installer process] successfully disabled the system restore point creation setting
libwdi:debug [process_message] switching timeout to infinite
libwdi:debug [installer process] Installing driver for USB\VID_20A0&PID_4256&REV_0010 - please wait...
libwdi:debug [syslog] <Garbled data>
libwdi:debug [syslog] >>> [Device Install (UpdateDriverForPlugAndPlayDevices) - USB\VID_20A0&PID_4256&REV_0010]
libwdi:debug [syslog] >>> Section start 2017/04/16 22:56:35.610
libwdi:debug [syslog] cmd: "C:\Users\호재근\usb_driver\installer_x64.exe" "Neo_Pocket_Flash_Masta_USB.inf"
libwdi:debug [syslog] ndv: INF path: C:\Users\호재근\usb_driver\Neo_Pocket_Flash_Masta_USB.inf
libwdi:debug [syslog] ndv: Install flags: 0x00000001
libwdi:debug [syslog] ndv: {Update Device Driver - USB\VID_20A0&PID_4256\00001}
libwdi:debug [syslog] ndv: Search options: 0x00000080
libwdi:debug [syslog] ndv: Searching single INF 'C:\Users\호재근\usb_driver\Neo_Pocket_Flash_Masta_USB.inf'
libwdi:debug [syslog] dvi: {Build Driver List} 22:56:35.648
libwdi:debug [syslog] dvi: Searching for hardware ID(s):
libwdi:debug [syslog] dvi: usb\vid_20a0&pid_4256&rev_0010
libwdi:debug [syslog] dvi: usb\vid_20a0&pid_4256
libwdi:debug [syslog] dvi: Searching for compatible ID(s):
libwdi:debug [syslog] dvi: usb\class_ff&subclass_00&prot_00
libwdi:debug [syslog] dvi: usb\class_ff&subclass_00
libwdi:debug [syslog] dvi: usb\class_ff
libwdi:debug [syslog] sig: {_VERIFY_FILE_SIGNATURE} 22:56:35.701
libwdi:debug [syslog] sig: Key = neo_pocket_flash_masta_usb.inf
libwdi:debug [syslog] sig: FilePath = c:\users\호재근\usb_driver\neo_pocket_flash_masta_usb.inf
libwdi:debug [syslog] sig: Catalog = c:\users\호재근\usb_driver\Neo_Pocket_Flash_Masta_USB.cat
libwdi:debug [syslog] ! sig: Verifying file against specific (valid) catalog failed! (0x800b0109)
libwdi:debug [syslog] ! sig: Error 0x800b0109: A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider.
libwdi:debug [syslog] sig: {_VERIFY_FILE_SIGNATURE exit(0x800b0109)} 22:56:35.777
libwdi:debug [syslog] sig: {_VERIFY_FILE_SIGNATURE} 22:56:35.782
libwdi:debug [syslog] sig: Key = neo_pocket_flash_masta_usb.inf
libwdi:debug [syslog] sig: FilePath = c:\users\호재근\usb_driver\neo_pocket_flash_masta_usb.inf
libwdi:debug [syslog] sig: Catalog = c:\users\호재근\usb_driver\Neo_Pocket_Flash_Masta_USB.cat
libwdi:debug [syslog] ! sig: Verifying file against specific Authenticode™ catalog failed! (0x800b0100)
libwdi:debug [syslog] ! sig: Error 0x800b0100: No signature was present in the subject.
libwdi:debug [syslog] sig: {_VERIFY_FILE_SIGNATURE exit(0x800b0100)} 22:56:35.828
libwdi:debug [syslog] dvi: Created Driver Node:
libwdi:debug [syslog] dvi: HardwareID - USB\VID_20A0&PID_4256
libwdi:debug [syslog] dvi: InfName - c:\users\호재근\usb_driver\neo_pocket_flash_masta_usb.inf
libwdi:debug [syslog] dvi: DevDesc - Neo Pocket Flash Masta USB
libwdi:debug [syslog] dvi: Section - USB_Install
libwdi:debug [syslog] dvi: Rank - 0x80ff0001
libwdi:debug [syslog] dvi: Signer Score - Not digitally signed
libwdi:debug [syslog] dvi: DrvDate - 04/16/2017
libwdi:debug [syslog] dvi: Version - 0
libwdi:debug [syslog] dvi: {Build Driver List - exit(0x00000000)} 22:56:35.874
libwdi:debug [syslog] dvi: {DIF_SELECTBESTCOMPATDRV} 22:56:35.878
libwdi:debug [syslog] dvi: Default installer: Enter 22:56:35.881
libwdi:debug [syslog] dvi: {Select Best Driver}
libwdi:debug [syslog] dvi: Class GUID of device changed to: {88bae032-5a81-49f0-bc3d-a4ff138216d6}.
libwdi:debug [syslog] dvi: Selected:
libwdi:debug [syslog] dvi: Description - [Neo Pocket Flash Masta USB]
libwdi:debug [syslog] dvi: InfFile - [c:\users\호재근\usb_driver\neo_pocket_flash_masta_usb.inf]
libwdi:debug [syslog] dvi: Section - [USB_Install]
libwdi:debug [syslog] dvi: {Select Best Driver - exit(0x00000000)}
libwdi:debug [syslog] dvi: Default installer: Exit
libwdi:debug [syslog] dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 22:56:35.922
libwdi:debug [syslog] ndv: Forcing driver install:
libwdi:debug [syslog] ndv: Inf Name - neo_pocket_flash_masta_usb.inf
libwdi:debug [syslog] ndv: Driver Date - 04/16/2017
libwdi:debug [syslog] ndv: Driver Version - 0.0.0.0
libwdi:debug [syslog] sto: {Setup Import Driver Package: c:\users\호재근\usb_driver\neo_pocket_flash_masta_usb.inf} 22:56:35.945
libwdi:debug [syslog] inf: Provider: libwdi
libwdi:debug [syslog] inf: Class GUID: {88bae032-5a81-49f0-bc3d-a4ff138216d6}
libwdi:debug [syslog] inf: Driver Version: 04/16/2017,0.0.0.0
libwdi:debug [syslog] inf: Catalog File: Neo_Pocket_Flash_Masta_USB.cat
libwdi:debug [syslog] sto: {Copy Driver Package: c:\users\호재근\usb_driver\neo_pocket_flash_masta_usb.inf} 22:56:35.969
libwdi:debug [syslog] sto: Driver Package = c:\users\호재근\usb_driver\neo_pocket_flash_masta_usb.inf
libwdi:debug [syslog] sto: Flags = 0x00000007
libwdi:debug [syslog] sto: Destination = C:\Users\호재근\AppData\Local\Temp\{76da3ff2-5ad6-294a-b62a-4d6381782f17}
libwdi:debug [syslog] sto: Copying driver package files to 'C:\Users\호재근\AppData\Local\Temp\{76da3ff2-5ad6-294a-b62a-4d6381782f17}'.
libwdi:debug [syslog] flq: Copying 'c:\users\호재근\usb_driver\Neo_Pocket_Flash_Masta_USB.cat' to 'C:\Users\호재근\AppData\Local\Temp\{76da3ff2-5ad6-294a-b62a-4d6381782f17}\Neo_Pocket_Flash_Masta_USB.cat'.
libwdi:debug [syslog] flq: Copying 'c:\users\호재근\usb_driver\neo_pocket_flash_masta_usb.inf' to 'C:\Users\호재근\AppData\Local\Temp\{76da3ff2-5ad6-294a-b62a-4d6381782f17}\neo_pocket_flash_masta_usb.inf'.
libwdi:debug [syslog] flq: Copying 'c:\users\호재근\usb_driver\amd64\WdfCoInstaller01011.dll' to 'C:\Users\호재근\AppData\Local\Temp\{76da3ff2-5ad6-294a-b62a-4d6381782f17}\amd64\WdfCoInstaller01011.dll'.
libwdi:debug [syslog] flq: Copying 'c:\users\호재근\usb_driver\amd64\WinUSBCoInstaller2.dll' to 'C:\Users\호재근\AppData\Local\Temp\{76da3ff2-5ad6-294a-b62a-4d6381782f17}\amd64\WinUSBCoInstaller2.dll'.
libwdi:debug [syslog] sto: {Copy Driver Package: exit(0x00000000)} 22:56:36.032
libwdi:debug [syslog] pol: {Driver package policy check} 22:56:36.039
libwdi:debug [syslog] pol: {Driver package policy check - exit(0x00000000)} 22:56:36.040
libwdi:debug [syslog] sto: {Stage Driver Package: C:\Users\호재근\AppData\Local\Temp\{76da3ff2-5ad6-294a-b62a-4d6381782f17}\neo_pocket_flash_masta_usb.inf} 22:56:36.041
libwdi:debug [syslog] inf: {Query Configurability: C:\Users\호재근\AppData\Local\Temp\{76da3ff2-5ad6-294a-b62a-4d6381782f17}\neo_pocket_flash_masta_usb.inf} 22:56:36.045
libwdi:debug [syslog] inf: Driver package uses WDF.
libwdi:debug [syslog] inf: Driver package 'neo_pocket_flash_masta_usb.inf' is configurable.
libwdi:debug [syslog] inf: {Query Configurability: exit(0x00000000)} 22:56:36.050
libwdi:debug [syslog] flq: Copying 'C:\Users\호재근\AppData\Local\Temp\{76da3ff2-5ad6-294a-b62a-4d6381782f17}\Neo_Pocket_Flash_Masta_USB.cat' to 'C:\WINDOWS\System32\DriverStore\Temp\{40f26d06-37e0-764e-8caf-6a76d11b0e16}\Neo_Pocket_Flash_Masta_USB.cat'.
libwdi:debug [syslog] flq: Copying 'C:\Users\호재근\AppData\Local\Temp\{76da3ff2-5ad6-294a-b62a-4d6381782f17}\neo_pocket_flash_masta_usb.inf' to 'C:\WINDOWS\System32\DriverStore\Temp\{40f26d06-37e0-764e-8caf-6a76d11b0e16}\neo_pocket_flash_masta_usb.inf'.
libwdi:debug [syslog] flq: Copying 'C:\Users\호재근\AppData\Local\Temp\{76da3ff2-5ad6-294a-b62a-4d6381782f17}\amd64\WdfCoInstaller01011.dll' to 'C:\WINDOWS\System32\DriverStore\Temp\{40f26d06-37e0-764e-8caf-6a76d11b0e16}\amd64\WdfCoInstaller01011.dll'.
libwdi:debug [syslog] flq: Copying 'C:\Users\호재근\AppData\Local\Temp\{76da3ff2-5ad6-294a-b62a-4d6381782f17}\amd64\WinUSBCoInstaller2.dll' to 'C:\WINDOWS\System32\DriverStore\Temp\{40f26d06-37e0-764e-8caf-6a76d11b0e16}\amd64\WinUSBCoInstaller2.dll'.
libwdi:debug [syslog] sto: {DRIVERSTORE IMPORT VALIDATE} 22:56:36.108
libwdi:debug [syslog] !!! sig: Driver package INF file hash is not present in catalog file. Filename = neo_pocket_flash_masta_usb.inf, Error = 0xE000024B
libwdi:debug [syslog] !!! sig: Driver package appears to be tampered, and Code Integrity is enforced.
libwdi:debug [syslog] !!! sig: Driver package failed signature validation. Error = 0xE000024B
libwdi:debug [syslog] sto: {DRIVERSTORE IMPORT VALIDATE: exit(0xe000024b)} 22:56:36.125
libwdi:debug [syslog] !!! sig: Driver package failed signature verification. Error = 0xE000024B
libwdi:debug [syslog] !!! sto: Failed to import driver package into Driver Store. Error = 0xE000024B
libwdi:debug [syslog] sto: {Stage Driver Package: exit(0xe000024b)} 22:56:36.128
libwdi:debug [syslog] sto: {Setup Import Driver Package - exit (0xe000024b)} 22:56:36.137
libwdi:debug [syslog] !!! ndv: Driver package import failed for device.
libwdi:debug [syslog] !!! ndv: Error 0xe000024b: The hash for the file is not present in the specified catalog file. The file is likely corrupt or the victim of tampering.
libwdi:debug [syslog] ndv: Installing NULL driver.
libwdi:debug [syslog] dvi: {Plug and Play Service: Device Install for USB\VID_20A0&PID_4256\00001}
libwdi:debug [syslog] ! ndv: Installing NULL driver!
libwdi:debug [syslog] dvi: {DIF_ALLOW_INSTALL} 22:56:36.242
libwdi:debug [syslog] dvi: Default installer: Enter 22:56:36.243
libwdi:debug [syslog] dvi: Default installer: Exit
libwdi:debug [syslog] dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 22:56:36.244
libwdi:debug [syslog] dvi: {DIF_REGISTER_COINSTALLERS} 22:56:36.245
libwdi:debug [syslog] dvi: Default installer: Enter 22:56:36.246
libwdi:debug [syslog] dvi: Default installer: Exit
libwdi:debug [syslog] dvi: {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 22:56:36.247
libwdi:debug [syslog] dvi: {DIF_INSTALLDEVICE} 22:56:36.248
libwdi:debug [syslog] dvi: Default installer: Enter 22:56:36.248
libwdi:debug [syslog] ! dvi: Installing NULL driver!
libwdi:debug [syslog] dvi: Install Null Driver: Removing device sub-tree. 22:56:36.251
libwdi:debug [syslog] dvi: Install Null Driver: Removing device sub-tree completed. 22:56:36.255
libwdi:debug [syslog] dvi: Install Null Driver: Restarting device. 22:56:36.261
libwdi:debug [syslog] dvi: Install Null Driver: Restarting device completed. 22:56:36.265
libwdi:debug [syslog] dvi: Install Device: Starting device. 22:56:36.266
libwdi:debug [process_message] switching timeout back to finite
libwdi:debug [installer process] unable to locate the file hashes in cat file
libwdi:debug [process_message] installer process completed
Driver Installation: FAILED (Requested resource not found)
1 device found.
libwdi:debug [wdi_create_list] Hardware ID: USB\VID_20A0&PID_4256&REV_0010
libwdi:debug [wdi_create_list] Compatible ID: USB\Class_FF&SubClass_00&Prot_00
libwdi:debug [wdi_create_list] Driverless USB device (9): USB\VID_20A0&PID_4256\00001
libwdi:debug [wdi_create_list] Device description: 'Neo Pocket Flash Masta USB'
Where it says "WinUSB" you should try to select another option and then INSTALL. See if that will succeed or fail. I also contacted Zadig via email. Perhaps they have seen this problem. I wonder if it has to do with the Korean characters in the path.
(04-17-2017, 02:47 AM)Flavor Wrote: [ -> ]Where it says "WinUSB" you should try to select another option and then INSTALL. See if that will succeed or fail. I also contacted Zadig via email. Perhaps they have seen this problem. I wonder if it has to do with the Korean characters in the path.

After reading your opinion, I thought about it.
Because of not English in the path, I changed my path to English.
I created an English name account.
As a result, the driver was successfully installed. Big Grin

Then again, there was another problem.

Flashmasta Program does not run.
An error occurs causing an end to the shutdown.



See below attach files.

1. flashmasta.exe
[attachment=652]

2. run
[attachment=653]

3. occur error
[attachment=654]

4. shutdown message
[attachment=655]
'A problem has occurred causing the program to stop working.Windows will close the program and tell you if there is a workaround.'


Regards.
Pages: 1 2