Got my 2.1 yesterday, today I built it! Pics - Printable Version +- Freeplaytech Forum (https://forum.freeplaytech.com) +-- Forum: Freeplay Zero / Freeplay CM3 / Game Pie Advance (https://forum.freeplaytech.com/forumdisplay.php?fid=24) +--- Forum: Freeplay Zero/CM3 (AKA GPA) Hardware (https://forum.freeplaytech.com/forumdisplay.php?fid=25) +--- Thread: Got my 2.1 yesterday, today I built it! Pics (/showthread.php?tid=4447) |
Got my 2.1 yesterday, today I built it! Pics - queekus - 03-23-2017 I did not take pics during the build but I have the Flash Master's Handy Youtube video, I did have to trim around the volume knob a bit and I did not have to trim the shoulder buttons at all. I have not installed the button caps yet. It took a chunk of the day, I took my time making it and it paid off because it fired up first try! Thanks again! I will be loading it with games overnight and playing with it tomorrow! L http://imgur.com/a/E6Wal RE: Got my 2.1 yesterday, today I built it! Pics - Flavor - 03-24-2017 Nice work, queekus! Thanks for posting! I grabbed one of your photos to display here. I hope you don't mind. And it has also been added to http://gamepieadvance.com/showcase/ RE: Got my 2.1 yesterday, today I built it! Pics - queekus - 03-25-2017 quick question about some of the extra pieces: 1. white connector terminal, I'm assuming that can be used to connect a second battery to the board if you had 2 flat-cell type batteries 2. 4 pin header, no idea what that is for 3. 2 button caps, THANKS! 4. OTG adapter, THANKS! 5. 4 screws, not sure where these were supposed to go. Also, can I clip off a little of the y and x button shafts if i want the button caps to sit a little lower? Thanks! L RE: Got my 2.1 yesterday, today I built it! Pics - Flavor - 03-25-2017 1) TRUE 2) See #1 (in case your battery uses a different connector) 3) You're welcome! 4) You're welcome! 5) Can you post a photo? I don't know why/how you got screws. Button Shafts) You sure can clip them down, but it may be difficult to get them exactly the same height. I've never tried it, so I can't recommend it or not. RE: Got my 2.1 yesterday, today I built it! Pics - queekus - 03-25-2017 (03-25-2017, 07:49 AM)Flavor Wrote: 1) TRUE http://imgur.com/a/KU1cD They fit typical pi hat standoff posts. |