+- Freeplaytech Forum (https://forum.freeplaytech.com)
+-- Forum: Freeplay Zero / Freeplay CM3 / Game Pie Advance (https://forum.freeplaytech.com/forumdisplay.php?fid=24)
+--- Forum: Freeplay Zero/CM3 (AKA GPA) Software (https://forum.freeplaytech.com/forumdisplay.php?fid=26)
+--- Thread: Removing text before ES boot (/showthread.php?tid=4591)
Removing text before ES boot - sneakypebbles - 03-25-2018
Hey guys I've recently added a splash screen to my freeplay zero and was wondering how to get rid of all the text before boot. I have followed this youtube guide (https://www.youtube.com/watch?v=zHY_Pd3fDNE) to remove boot text from retropie, however three lines of code remain relating to Freeplay zero:
[ 2.857605] mk_arcade_joystick_rpi: Freeplay Button Driver
[ 2.857762] mk_arcade_joystick_rpi: pad type 4
[ 2.857858] mk_arcade_joystick_rpi: pad type 4
I was wondering if there is a way to hide these and if possible keep the screen white until my splash screen boots. Any help you guys can give me would be greatly appreciated. Thanks!
RE: Removing text before ES boot - Flavor - 03-25-2018
Those are in https://github.com/TheFlav/mk_arcade_joystick_rpi/blob/master/mk_arcade_joystick_rpi.c but I can’t tell you much right now. Traveling for a week.
RE: Removing text before ES boot - williamallen941 - 03-26-2018
(03-25-2018, 03:22 AM)sneakypebbles Wrote: Hey guys I've recently added a splash screen to my freeplay zero and was wondering how to get rid of all the text before boot. I have followed this youtube guide (https://www.youtube.com/watch?v=zHY_Pd3fDNE) to remove boot text from retropie, however three lines of code remain relating to Freeplay zero:
[ 2.857605] mk_arcade_joystick_rpi: Freeplay Button Driver
[ 2.857762] mk_arcade_joystick_rpi: pad type 4
[ 2.857858] mk_arcade_joystick_rpi: pad type 4
I was wondering if there is a way to hide these and if possible keep the screen white until my splash screen boots. Any help you guys can give me would be greatly appreciated. Thanks!
I removed that by following this guide: https://raspberrypi.stackexchange.com/questions/59310/remove-boot-messages-all-text-in-jessie
I believe I only edited the bits in /boot/cmdline.txt
It goes straight through now from white, to my splash and then Emulationstation. This also gives no text on shutdown. Very clean.
RE: Removing text before ES boot - sneakypebbles - 03-26-2018
(03-26-2018, 01:39 AM)williamallen941 Wrote:(03-25-2018, 03:22 AM)sneakypebbles Wrote: Hey guys I've recently added a splash screen to my freeplay zero and was wondering how to get rid of all the text before boot. I have followed this youtube guide (https://www.youtube.com/watch?v=zHY_Pd3fDNE) to remove boot text from retropie, however three lines of code remain relating to Freeplay zero:
[ 2.857605] mk_arcade_joystick_rpi: Freeplay Button Driver
[ 2.857762] mk_arcade_joystick_rpi: pad type 4
[ 2.857858] mk_arcade_joystick_rpi: pad type 4
I was wondering if there is a way to hide these and if possible keep the screen white until my splash screen boots. Any help you guys can give me would be greatly appreciated. Thanks!
I removed that by following this guide: https://raspberrypi.stackexchange.com/questions/59310/remove-boot-messages-all-text-in-jessie
I believe I only edited the bits in /boot/cmdline.txt
It goes straight through now from white, to my splash and then Emulationstation. This also gives no text on shutdown. Very clean.
Hi thanks for the reply I've followed this guide but the text still remainsWould you be able to copy your /boot/cmdline.txt so I can compare to see if I'm missing something? Thanks!
RE: Removing text before ES boot - williamallen941 - 03-26-2018
Code:
dwc_otg.lpm_enable=0 console=serial0,115200 console=tty3 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash loglevel=0 logo.nologo vt.global_cursor_default=0 consoleblank=0 plymouth.enable=0Hope that helps! Let me know and I'll dig deeper if not.
RE: Removing text before ES boot - sneakypebbles - 03-26-2018
(03-26-2018, 09:20 AM)williamallen941 Wrote:Code:dwc_otg.lpm_enable=0 console=serial0,115200 console=tty3 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash loglevel=0 logo.nologo vt.global_cursor_default=0 consoleblank=0 plymouth.enable=0
Hope that helps! Let me know and I'll dig deeper if not.
That certainly helps, thank you so much. Almost there. It has removed the few lines that were the initial problem however a wall of text pops up briefly (too fast to read) something about a last login... Any ideas what this could be?
RE: Removing text before ES boot - williamallen941 - 03-26-2018
Follow the steps in the link I gave above (scroll down a bit), rebooting between each one. It should get it.
RE: Removing text before ES boot - williamallen941 - 03-31-2018
Did you ever get this solved sneakypebbles? If not, I'm still willing to help.