![]() |
Retropie on Freeplay CM3 - hotkeys? - Printable Version +- Freeplaytech Forum (https://forum.freeplaytech.com) +-- Forum: Freeplay Zero / Freeplay CM3 / Game Pie Advance (https://forum.freeplaytech.com/forumdisplay.php?fid=24) +--- Forum: Freeplay Zero/CM3 (AKA GPA) Software (https://forum.freeplaytech.com/forumdisplay.php?fid=26) +--- Thread: Retropie on Freeplay CM3 - hotkeys? (/showthread.php?tid=5144) |
Retropie on Freeplay CM3 - hotkeys? - kkaminski - 08-11-2020 Noob here. Just finished assembling my Freeplay CM3, and everything seems to be working perfectly, except for hotkeys. For example, I have configured the controller, and set the power button as the hotkey as recommended, but it's not working. I'm not able to exit out of a ROM and return to the menu... I can only shut down completely and then reboot. Any help would be much appreciated! RE: Retropie on Freeplay CM3 - hotkeys? - Flavor - 08-12-2020 How are you using the hotkey? What emulator are you using? SOME emulators do not adhere to the libretro schemes. The libretro emulators are usually named with a "lr-" prefix. You might want to hit START+SELECT in the emulator to see if that's the binding (which is common for the non-lr emulators). Otherwise, our default scheme (hotkey toggle mode using the power button) would be to tap-release the power button and then tap the start button. Can you SSH into the machine? If so, you can test the keys with the following command: jstest /dev/input/js0 Also, you can post here with the output of this command: cat /etc/modprobe.d/mk_arcade_joystick.conf RE: Retropie on Freeplay CM3 - hotkeys? - kkaminski - 08-12-2020 Tap-release on the power button followed by start worked perfectly. Thanks very much! |