After update, gamepad stops working [Freeplay Zero]

[TexasPorcupine]

I'm in the same boat. I was trying to see if I could get ppsspp to work by updating Retropie. I've tried 0.1.5.6, 0.1.5.7 and 0.1.5.10 and neither seem to work.

After updating to the latest (which I think is now 0.1.6.0), can you post the output of

Code:

cat /etc/modprobe.d/mk_arcade_joystick.conf

It really only needs a single line in there, but it may be rather large if you tried to update several times.  I'm guessing that you have an old line in there that doesn't have the correct number of options for the gpio parameter (just a guess).

Okay, this is the response I got:


options mk_arcade_joystick_rpi map=4 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,-1,-1,-1,-1,-1,-1,-1,-1 hkmode=2
#this next line is for use with 4 extra buttons (maybe L2,R2,C,Z)
#options mk_arcade_joystick_rpi map=4 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,41,40,-1,-1,-1,-1 hkmode=2
#this next line is for use with a single PSP1000 analog stick
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1
#this next line is for use with 2 PSP1000 analog sticks
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 x2addr=75 y2addr=79 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1
#this next line is an example for use with 8 extra buttons (maybe L2,R2,C,Z,TOP,TOP2,BASE,BASE2)
#options mk_arcade_joystick_rpi map=4 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,41,40,35,36,37,38 hkmode=2
#this next line is for use with a single PSP1000 analog stick using min/max/fuzz/flat parameters
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 x1params=374,3418,16,384 y1params=517,3378,16,384 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1


Thank you!