FP0 Left trigger issues

[SylentSnipe]

Okay, here is the test document Andrew put together.  I think it can be quite helpful to determine if your issue lies in the Freeplay Zero PCB or with the Raspberry Pi Zero (or its connections to the FPZ PCB)
https://www.freeplaytech.com/support/troubleshooting/

Very much appreciated, I will take a look at the pinouts and see that the issue is.

[Flavor]

Just a heads-up.  The photos in that document were (accidentally) taken with the guide paper taped on upside-down.  The paper should be placed with pin 1 (labeled "+3V3") on the "square" pin of the Pi.  

If you notice, the Raspberry Pi Zero has round "holes" where the pins get hammered/soldered in.  The copper of one of them is square instead of round (like the other 39).  

We will update the PDF soon, but just be aware that if you follow the guide, the paper is taped on backward.  I'm going to actually remove the guide from our website for the time being, just so people don't short across anything wrong by accident.

[Flavor]

Okay, sorry, that PDF has been fixed.