l2/r2 analog stick board

[abd333]

Running into this error when building from image `Freeplay_CM3_20051201`



Creating symlink /var/lib/dkms/mk_arcade_joystick_rpi/0.1.6.3/source ->
                 /usr/src/mk_arcade_joystick_rpi-0.1.6.3

DKMS: add completed.
Error! echo
Your kernel headers for kernel 4.14.98-v7+ cannot be found at
/lib/modules/4.14.98-v7+/build or /lib/modules/4.14.98-v7+/source.
Error! echo
Your kernel headers for kernel 4.14.98-v7+ cannot be found at
/lib/modules/4.14.98-v7+/build or /lib/modules/4.14.98-v7+/source.
mk_arcade_joystick_rpi already present in /etc/modules
You may need to edit /etc/modules by hand

/etc/modprobe.d/mk_arcade_joystick.conf exists and contains options for mk_arcade_joystick_rpi
Already contain lines for v0.1.5.10+ of the driver

modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.14.98-v7+/modules.dep.bin'
modprobe: FATAL: Module mk_arcade_joystick_rpi not found in directory /lib/modules/4.14.98-v7+
It is recommended that you run 'sudo nano /etc/modprobe.d/mk_arcade_joystick.conf' to set up desired parameters.
0


After reboot none of the controller inputs are registered (i.e. can't navigate EmulationStation, for example) and WiFi doesn't connect so can't SSH in.

Any ideas/thoughts on this?