l2/r2 analog stick board

[Flavor]

That's great news, maxh123!

I still have not figured out what went wrong for aarontrini85.  I just took the Freeplay_CM3_18081001.img.gz file, burned it to SD, booted it up, went through all the RetroPie updates, rebooted, SSH'd in, and then installed the mk_arcade_joystick_rpi driver using the following method.

Code:

cd /home/pi/Freeplay
mv mk_arcade_joystick_rpi mk_arcade_joystick_rpi_old
git clone https://github.com/TheFlav/mk_arcade_joystick_rpi.git
cd mk_arcade_joystick_rpi
./install.sh

It seems to have worked fine. I will release a new SD image using this update. After that, you would only need to edit the options file (and maybe CONFIGURE INPUT) if you have the L2/R2 addon.

Code:

sudo nano /etc/modprobe.d/mk_arcade_joystick.conf

I was planning on adding some new options to the driver, so that's why I've put off releasing the SD image, but I think this is a better solution until I do.