05-30-2020, 10:50 AM
(05-30-2020, 10:26 AM)Porcinus Wrote: Even if the driver fail once, it shouldn't restart on its own, looking at your logs, it does it 3-4 times.
Not sure problem come from the module itself.
Can you attach your config file please (raw from ssh, without additional edit).
I don't have my device on hand but maybe we could catch the problem with this. It is possible that there is a escape character or a encoding problem somewhere.
#options mk_arcade_joystick_rpi map=4 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,-1,-1,-1,-1 hkmode=2
#this next line is for use with 4 extra buttons (maybe L2,R2,C,Z)
options mk_arcade_joystick_rpi map=4 gpio=4,17,27,22,10,9,25,24,23,18,15,14,2,19,26,-1,-1,-1,-1,-1,-1 hkmode=2
#this next line is for use with a single PSP1000 analog stick
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41
#this next line is for use with 2 PSP1000 analog sticks
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 x2addr=75 y2addr=79 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41
So? or otherwise I did not understand well! I use a translator
