(08-07-2021, 08:40 AM)OnlyCatapults Wrote:I didn't notice this before. It's good that you bumped. Check your mk_arcade_joystick.conf file and look at the gpio=4,17,6,5,19,26,16,18,23,24,15,14,-20,-43,-42,-1,-1,-1,-1,-1,-1 piece.(07-27-2021, 03:01 PM)OnlyCatapults Wrote: Okay, we're making progress, everything is working now except my L2/R2. Analog, face buttons. Everything else is great!
Interestingly, it seems I'm able to assign the L2/R2 buttons in the actual make config, but after I run `gpio readall` post setup, they're not showing as being pressed at all.
I've attached 3 files now:
- The readout before L2/R2 was pressed.
- The same readout after both have been pressed and held in.
- The contents of `/mk_arcade_joystick.conf`
Thanks again so much for your help with this.
Hey, bumping. Still haven't quite figured this issue out, if anybody is willing to help me.
The -20 is okay. That's normal, as the power button is wired differently than all the others.
The -43 and -42 aren't good if you're using our hardware.
Try changing the whole thing to this:
gpio=4,17,6,5,19,26,16,18,23,24,15,14,-20,43,42,-1,-1,-1,-1,-1,-1
I hope that'll fix L2/R2.
Try that and post about what is still left to fix.
Card Fighters' Clash 2 English Translation ( http://cfc2english.blogspot.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ )
Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ )
Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )