11-05-2019, 08:41 AM
OUT means that its set as an output.
0 is off. 1 is on. (that could be reversed for some things, but that's how it is for our fan control)
The temp will just keep going, because the script that I had you run will just keep maxing out the CPU. But, a couple things will happen. If the fan can't cool it enough, then the CPU will start to throttle itself back. I think the 'vcgencmd measure_clock arm' part will tell you the clock speed.
So, you could leave it run for a while to see what happens, or you can just turn it off like you did.
The fan will definitely help cool it, but the 'stress' test you're running will just continue to stress the CPU as much as possible (for 900seconds total).
0 is off. 1 is on. (that could be reversed for some things, but that's how it is for our fan control)
The temp will just keep going, because the script that I had you run will just keep maxing out the CPU. But, a couple things will happen. If the fan can't cool it enough, then the CPU will start to throttle itself back. I think the 'vcgencmd measure_clock arm' part will tell you the clock speed.
So, you could leave it run for a while to see what happens, or you can just turn it off like you did.
The fan will definitely help cool it, but the 'stress' test you're running will just continue to stress the CPU as much as possible (for 900seconds total).
Card Fighters' Clash 2 English Translation ( http://cfc2english.blogspot.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ )
Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ )
Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )