07-22-2020, 12:56 PM
update, did some voltage checks with the system on!
1.24 at terminal mate point to the motherboard, while active/on and plugged in.
3.7v at each of the l2/r2 triggers
and last but not least, i snipped each of the wires from the analogs (psp1000 per spec) and no voltage variables changed. pic of motherboard attached so you can see how things are run under the CM
1.24 at terminal mate point to the motherboard, while active/on and plugged in.
3.7v at each of the l2/r2 triggers
and last but not least, i snipped each of the wires from the analogs (psp1000 per spec) and no voltage variables changed. pic of motherboard attached so you can see how things are run under the CM