How to update the Freeplay from Compute module 3 to Compute module 3+

[faresdelvalle]

it looks like my joystick is outdated. I recently did a new img and
sudo nano /etc/modprobe.d/mk_arcade_joystick.conf and this was the results below. I'm currently in

ls /usr/src/
linux-headers-4.19.66+ linux-headers-4.19.66-v7+ mk_arcade_joystick_rpi-0.1.5.6 mk_arcade_joystick_rpi-0.1.5.7 xpad-0.4

##### Options below this line are for v0.1.5.10+ of the driver. Options above this may not function.
#U,D,L,R BTN_START, BTN_SELECT, BTN_A, BTN_B, BTN_TR, BTN_Y, BTN_X, BTN_TL, BTN_MODE, BTN_TL2, BTN_TR2, BTN_C, BTN_Z
#options mk_arcade_joystick_rpi map=4 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,-1,-1,-1,-1,-1,-1,-1,-1 hkmode=2
#this next line is for use with 4 extra buttons (maybe L2,R2,C,Z)
#options mk_arcade_joystick_rpi map=4 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,41,40,-1,-1,-1,-1 hkmode=2
#this next line is for use with a single PSP1000 analog stick
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1
#this next line is for use with 2 PSP1000 analog sticks
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 x2addr=75 y2addr=79 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1
#this next line is an example for use with 8 extra buttons (maybe L2,R2,C,Z,TOP,TOP2,BASE,BASE2)
#options mk_arcade_joystick_rpi map=4 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,41,40,35,36,37,38 hkmode=2
#this next line is for use with a single PSP1000 analog stick using min/max/fuzz/flat parameters
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 x1params=374,3418,16,384 y1params=517,3378,16,384 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1
##### Options below this line are for v0.1.5.10 of the driver. Options above this may not function.
#options mk_arcade_joystick_rpi map=4 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,-1,-1,-1,-1,-1,-1,-1,-1 hkmode=2
#this next line is for use with a single PSP1000 analog stick
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1
#this next line is for use with 2 PSP1000 analog sticks
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 x2addr=75 y2addr=79 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1
#this next line is for use with a single PSP1000 analog stick using min/max/fuzz/flat parameters
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 x1params=374,3418,16,384 y1params=517,3378,16,384 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1
##### Options below this line are for v0.1.5.10 of the driver. Options above this may not function.
#options mk_arcade_joystick_rpi map=4 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,-1,-1,-1,-1,-1,-1,-1,-1 hkmode=2
#this next line is for use with a single PSP1000 analog stick
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1
#this next line is for use with 2 PSP1000 analog sticks
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 x2addr=75 y2addr=79 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1
#this next line is for use with a single PSP1000 analog stick using min/max/fuzz/flat parameters
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 x1params=374,3418,16,384 y1params=517,3378,16,384 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1
##### Options below this line are for v0.1.5.10 of the driver. Options above this may not function.
#options mk_arcade_joystick_rpi map=4 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,-1,-1,-1,-1,-1,-1,-1,-1 hkmode=2
#this next line is for use with a single PSP1000 analog stick
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1
#this next line is for use with 2 PSP1000 analog sticks
options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 x2addr=75 y2addr=79 x1params=1176,2868,16,300 y1params=689,2336,16,300 x2params=572,3154,16,300 y2params=354,1762,16,300 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,41,40,35,36,-1,-1
#this next line is for use with a single PSP1000 analog stick using min/max/fuzz/flat parameters
#options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=77 x1params=374,3418,16,384 y1params=517,3378,16,384 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,-1,41,-1,-1,-1,-1