How to update the Freeplay from Compute module 3 to Compute module 3+

[Flavor]

My earlier post mentioned how to upgrade. I’m sorry. I’m currently only on my phone, so reading/analyzing these long lines is quite difficult. I couldn’t see any obvious errors. The dmesg lines looked as if it were working. Did you use jstest? You should try it.

Do this command:

jstest /dev/input/js0

See more at https://github.com/TheFlav/mk_arcade_joystick_rpi

You can try this.

IF you want to try to re-install the joystick/button driver, you can do the following commands...

cd /home/pi/Freeplay/
mv mk_arcade_joystick_rpi mk_arcade_joystick_rpi__old
git clone https://github.com/TheFlav/mk_arcade_joystick_rpi.git
cd /home/pi/Freeplay/mk_arcade_joystick_rpi/
sudo mv /etc/modprobe.d/mk_arcade_joystick.conf /home/pi/Freeplay/mk_arcade_joystick_rpi/mk_arcade_joystick.conf.bak
./install.sh