03-14-2022, 04:31 AM
Hey folks,
I tried to install the appropriate driver per the instructions on the setup page and got this message
------------------------------
Deleting module version: 0.1.6.3
completely from the DKMS tree.
------------------------------
Done.
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'cpp-4.7-doc' for regex 'cpp-4.7'
Note, selecting 'gcc-4.7-doc' for regex 'gcc-4.7'
Note, selecting 'gcc-4.7-base' for regex 'gcc-4.7'
dkms is already the newest version (2.6.1-4).
joystick is already the newest version (1:1.6.1-1).
cpp-4.7-doc is already the newest version (4.7.4-1).
gcc-4.7-doc is already the newest version (4.7.4-1).
raspberrypi-kernel is already the newest version (1.20200212-1).
raspberrypi-kernel-headers is already the newest version (1.20200212-1).
wiringpi is already the newest version (2.50).
0 upgraded, 0 newly installed, 0 to remove and 13 not upgraded.
W: --force-yes is deprecated, use one of the options starting with --allow instead.
If your kernel was just updated, you may need to reboot and rerun this script
Creating symlink /var/lib/dkms/mk_arcade_joystick_rpi/0.1.6.3/source ->
/usr/src/mk_arcade_joystick_rpi-0.1.6.3
DKMS: add completed.
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area.....(bad exit status: 2)
'make' all KVER=4.19.97-v7+.....(bad exit status: 2)
Error! Bad return status for module build on kernel: 4.19.97-v7+ (armv7l)
Consult /var/lib/dkms/mk_arcade_joystick_rpi/0.1.6.3/build/make.log for more information.
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area.....(bad exit status: 2)
'make' all KVER=4.19.97-v7+.....(bad exit status: 2)
Error! Bad return status for module build on kernel: 4.19.97-v7+ (armv7l)
Consult /var/lib/dkms/mk_arcade_joystick_rpi/0.1.6.3/build/make.log for more information.
mk_arcade_joystick_rpi already present in /etc/modules
You may need to edit /etc/modules by hand
/etc/modprobe.d/mk_arcade_joystick.conf exists and contains options for mk_arcade_joystick_rpi
Already contain lines for v0.1.5.10+ of the driver
modprobe: FATAL: Module mk_arcade_joystick_rpi not found in directory /lib/modules/4.19.97-v7+
It is recommended that you run 'sudo nano /etc/modprobe.d/mk_arcade_joystick.conf' to set up desired parameters.
0
If there is a thread that someone can lead me to for help, I would greatly appreciate it. Also, it may be worth nothing that upon reboot the welcome config menu shows up on the screen but none of my buttons seem to respond. I apologize if this is has already been solved on another thread. I am quite new at this kind of thing and while I am enjoying it, I seem to have hit a snag. Thanks for any and all assistance.
I tried to install the appropriate driver per the instructions on the setup page and got this message
------------------------------
Deleting module version: 0.1.6.3
completely from the DKMS tree.
------------------------------
Done.
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'cpp-4.7-doc' for regex 'cpp-4.7'
Note, selecting 'gcc-4.7-doc' for regex 'gcc-4.7'
Note, selecting 'gcc-4.7-base' for regex 'gcc-4.7'
dkms is already the newest version (2.6.1-4).
joystick is already the newest version (1:1.6.1-1).
cpp-4.7-doc is already the newest version (4.7.4-1).
gcc-4.7-doc is already the newest version (4.7.4-1).
raspberrypi-kernel is already the newest version (1.20200212-1).
raspberrypi-kernel-headers is already the newest version (1.20200212-1).
wiringpi is already the newest version (2.50).
0 upgraded, 0 newly installed, 0 to remove and 13 not upgraded.
W: --force-yes is deprecated, use one of the options starting with --allow instead.
If your kernel was just updated, you may need to reboot and rerun this script
Creating symlink /var/lib/dkms/mk_arcade_joystick_rpi/0.1.6.3/source ->
/usr/src/mk_arcade_joystick_rpi-0.1.6.3
DKMS: add completed.
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area.....(bad exit status: 2)
'make' all KVER=4.19.97-v7+.....(bad exit status: 2)
Error! Bad return status for module build on kernel: 4.19.97-v7+ (armv7l)
Consult /var/lib/dkms/mk_arcade_joystick_rpi/0.1.6.3/build/make.log for more information.
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area.....(bad exit status: 2)
'make' all KVER=4.19.97-v7+.....(bad exit status: 2)
Error! Bad return status for module build on kernel: 4.19.97-v7+ (armv7l)
Consult /var/lib/dkms/mk_arcade_joystick_rpi/0.1.6.3/build/make.log for more information.
mk_arcade_joystick_rpi already present in /etc/modules
You may need to edit /etc/modules by hand
/etc/modprobe.d/mk_arcade_joystick.conf exists and contains options for mk_arcade_joystick_rpi
Already contain lines for v0.1.5.10+ of the driver
modprobe: FATAL: Module mk_arcade_joystick_rpi not found in directory /lib/modules/4.19.97-v7+
It is recommended that you run 'sudo nano /etc/modprobe.d/mk_arcade_joystick.conf' to set up desired parameters.
0
If there is a thread that someone can lead me to for help, I would greatly appreciate it. Also, it may be worth nothing that upon reboot the welcome config menu shows up on the screen but none of my buttons seem to respond. I apologize if this is has already been solved on another thread. I am quite new at this kind of thing and while I am enjoying it, I seem to have hit a snag. Thanks for any and all assistance.