Thanks, Flavor! I feel like I'm getting closer
I started with my current retropie image (the one downloaded from retropie.org.uk/download/) and noticed that the dtoverlay for waveshare32b was only under the pi0, pi2 and pi3 filters. I copied it directly from the README.md file in the repo (the actual config.txt file has it correctly under the `all` filter) but unfortunately there's still no image, the program no longer crashes and I don't see issues in daemon.log but the screen is still white on any of the fbcp options. Perhaps there's a speed or a DMA channel that's not supported in Buster?
I then flashed the suggested image (Freeplay_CM3-and-Zero2_Test_22061501.img.gz) and I saw that FBCP works fine. There's an image on the screen and through HDMI. The resolution is too high for me to be able to read anything but I see things on the screen. Unfortunately, emulation station will fail to start with this image.
If I ssh into it and try to execute emulation station manually it throws the following error:
Should I try to use a different version of emulation station on top of this image or would it be better to try to make FBCP work on the retropie image where emulation station works fine? hehe
I started with my current retropie image (the one downloaded from retropie.org.uk/download/) and noticed that the dtoverlay for waveshare32b was only under the pi0, pi2 and pi3 filters. I copied it directly from the README.md file in the repo (the actual config.txt file has it correctly under the `all` filter) but unfortunately there's still no image, the program no longer crashes and I don't see issues in daemon.log but the screen is still white on any of the fbcp options. Perhaps there's a speed or a DMA channel that's not supported in Buster?
I then flashed the suggested image (Freeplay_CM3-and-Zero2_Test_22061501.img.gz) and I saw that FBCP works fine. There's an image on the screen and through HDMI. The resolution is too high for me to be able to read anything but I see things on the screen. Unfortunately, emulation station will fail to start with this image.
If I ssh into it and try to execute emulation station manually it throws the following error:
Code:
* failed to add service - already in use?Should I try to use a different version of emulation station on top of this image or would it be better to try to make FBCP work on the retropie image where emulation station works fine? hehe