https://forum.freeplaytech.com/ Tue, 20 Oct 2026 07:51:20 +0000 MyBB https://forum.freeplaytech.com/showthread.php?tid=5476 Fri, 16 Aug 2024 17:34:36 +0000 winteriscoming]]> https://forum.freeplaytech.com/showthread.php?tid=5476 https://retrogamerepairshop.com/collecti...idge-shell

There are also Wonderswan cartridge shells.

These could be nice to use for Flashmasta.]]> https://retrogamerepairshop.com/collecti...idge-shell

There are also Wonderswan cartridge shells.

These could be nice to use for Flashmasta.]]> https://forum.freeplaytech.com/showthread.php?tid=5469 Tue, 19 Mar 2024 16:49:29 +0000 guineapig]]> https://forum.freeplaytech.com/showthread.php?tid=5469
Neolinkmasta is not playing nice and crashes shortly after launch.. Any suggestions?

I'm running the latest windows build of Windows 11 pro.. Cart drivers installed properly..]]>
Neolinkmasta is not playing nice and crashes shortly after launch.. Any suggestions?

I'm running the latest windows build of Windows 11 pro.. Cart drivers installed properly..]]> https://forum.freeplaytech.com/showthread.php?tid=5465 Mon, 22 Jan 2024 09:19:42 +0000 fakemaria]]> https://forum.freeplaytech.com/showthread.php?tid=5465 Is it needed to add to that file and the resbuild the project or is there any way to do it easier?

https://github.com/TheFlav/Flash-Masta-D...pgames.xml

Thanks in advance!]]> Is it needed to add to that file and the resbuild the project or is there any way to do it easier?

https://github.com/TheFlav/Flash-Masta-D...pgames.xml

Thanks in advance!]]> https://forum.freeplaytech.com/showthread.php?tid=5426 Tue, 13 Jun 2023 22:02:16 +0000 funkey]]> https://forum.freeplaytech.com/showthread.php?tid=5426 When i connect it to computer - the red lights works, but zadig doesnt see the cart.

I checked it on 2 pc's and 1 mac; 6 different usb cables and all usb ports.
]]> When i connect it to computer - the red lights works, but zadig doesnt see the cart.

I checked it on 2 pc's and 1 mac; 6 different usb cables and all usb ports.
]]> https://forum.freeplaytech.com/showthread.php?tid=5404 Mon, 27 Feb 2023 15:50:09 +0000 Thefreeman]]> https://forum.freeplaytech.com/showthread.php?tid=5404 I was able to upload a backup just fine but when I tried again both of my PC's read the Flash Masta as "USB Device". I am unable to use the software and am unsure on how to fix this. I have tried three different cables on over ten different USB ports so I don't believe that is the issue.

Please let me know of any solutions that may be avaailable as i'm dying to explore this library! Thanks!]]> I was able to upload a backup just fine but when I tried again both of my PC's read the Flash Masta as "USB Device". I am unable to use the software and am unsure on how to fix this. I have tried three different cables on over ten different USB ports so I don't believe that is the issue.

Please let me know of any solutions that may be avaailable as i'm dying to explore this library! Thanks!]]> https://forum.freeplaytech.com/showthread.php?tid=5294 Fri, 07 Jan 2022 04:30:55 +0000 TheFunkDoctor]]> https://forum.freeplaytech.com/showthread.php?tid=5294
none of which detect or show the device as anything.


does anyone have any reccomendations?  

thank you]]>
none of which detect or show the device as anything.


does anyone have any reccomendations?  

thank you]]> https://forum.freeplaytech.com/showthread.php?tid=5269 Mon, 04 Oct 2021 23:12:48 +0000 Johny45]]> https://forum.freeplaytech.com/showthread.php?tid=5269 Sorry if this is not the right place but i am seeking help from anyone who can help me.
I recently buy a neo geo pocket with a flashmasta, it came with 2 games installed and works fine.
The problem is when i am trying to flash a new game into the cartridge, always gives me a error "Unable to open file", or even backup the already games in the cart it gives me "Unable to open destination file".
If anyone know what is this about pls help me.]]> Sorry if this is not the right place but i am seeking help from anyone who can help me.
I recently buy a neo geo pocket with a flashmasta, it came with 2 games installed and works fine.
The problem is when i am trying to flash a new game into the cartridge, always gives me a error "Unable to open file", or even backup the already games in the cart it gives me "Unable to open destination file".
If anyone know what is this about pls help me.]]> https://forum.freeplaytech.com/showthread.php?tid=5256 Wed, 21 Jul 2021 05:54:58 +0000 lijinqiu]]> https://forum.freeplaytech.com/showthread.php?tid=5256 https://forum.freeplaytech.com/showthread.php?tid=5210 Tue, 06 Apr 2021 09:54:07 +0000 MrBlueSky]]> https://forum.freeplaytech.com/showthread.php?tid=5210 Hello everyone, I hope you all had a nice Eastern Weekend. Speaking of Eastern, I'm struggling to "resuscitate" my Neo Pocket Flasmasta

A brief description of the situation:

• The NeoLinkMasta program won't recognize the cartridge.
  

• Zadig finds a "USB input device" (or "Périphérique d'entrée USB" because my computer is in French) as does Windows.
  

• No matter which driver I choose (USB Serial CDC - Win USB v6.1.7600.16385 - libusb-win32 (v1.2.6.0) - libusbK (v3.0.7.0) none of it makes the cartridge visible in the NeoLinkMasta. Nore does the "Install WCID Driver"...
  

I tried 2 different PCs, 3 different Cables, 4 different USB plugs.
I tried on Xubuntu but couldn't launch the executive. However the device appears under an Atmel name
I tried to reset the cartridge using the utilities Ed provided me 4 years ago. But without success, seems the reseting process doesn't goes to its end.
I tried to "uninstall" the device in Windows. Did not change much.
I renamed the "USB input device" into Neo Pocket Flash Masta USB". Didn't work...
I tried an older version of Zadig but it didn't change anything.

I'm a bit in despair and I hope you can help me.

Thanks in advance for your replies, let me know if you need further information.]]> Hello everyone, I hope you all had a nice Eastern Weekend. Speaking of Eastern, I'm struggling to "resuscitate" my Neo Pocket Flasmasta

A brief description of the situation:

• The NeoLinkMasta program won't recognize the cartridge.
  

• Zadig finds a "USB input device" (or "Périphérique d'entrée USB" because my computer is in French) as does Windows.
  

• No matter which driver I choose (USB Serial CDC - Win USB v6.1.7600.16385 - libusb-win32 (v1.2.6.0) - libusbK (v3.0.7.0) none of it makes the cartridge visible in the NeoLinkMasta. Nore does the "Install WCID Driver"...
  

I tried 2 different PCs, 3 different Cables, 4 different USB plugs.
I tried on Xubuntu but couldn't launch the executive. However the device appears under an Atmel name
I tried to reset the cartridge using the utilities Ed provided me 4 years ago. But without success, seems the reseting process doesn't goes to its end.
I tried to "uninstall" the device in Windows. Did not change much.
I renamed the "USB input device" into Neo Pocket Flash Masta USB". Didn't work...
I tried an older version of Zadig but it didn't change anything.

I'm a bit in despair and I hope you can help me.

Thanks in advance for your replies, let me know if you need further information.]]> https://forum.freeplaytech.com/showthread.php?tid=5158 Mon, 14 Sep 2020 21:32:28 +0000 treefroggy]]> https://forum.freeplaytech.com/showthread.php?tid=5158 https://imgur.com/a/rCoFALW
]]> https://imgur.com/a/rCoFALW
]]> https://forum.freeplaytech.com/showthread.php?tid=5063 Thu, 19 Dec 2019 02:44:55 +0000 qwertypwn69]]> https://forum.freeplaytech.com/showthread.php?tid=5063 https://forum.freeplaytech.com/showthread.php?tid=4687 Sun, 21 Oct 2018 12:17:01 +0000 LIKMUS]]> https://forum.freeplaytech.com/showthread.php?tid=4687
I ordered and received the flash masta last week.


I followed the tutorial on the site to install the drivers and flash masta software.
Until then everything is ok, the linker is well detected by my PC and I rename all the roms I had on my emulator psp in .ngp because they were in .ngc.


I precise that these roms work perfectly on my arcade cab and my PSP.

So I add a rom of 16mbit in each slot, I put the cartridge in the console and there the drama!

No game is launched, worse I have display bugs on the screen and despite switching between the 2 slot nothing to do it does not work! Automatically return to the console menu...


Can someone tell me why?
I put the photos so that you see what I have on the screen.
Thank you in advance;




]]>
I ordered and received the flash masta last week.


I followed the tutorial on the site to install the drivers and flash masta software.
Until then everything is ok, the linker is well detected by my PC and I rename all the roms I had on my emulator psp in .ngp because they were in .ngc.


I precise that these roms work perfectly on my arcade cab and my PSP.

So I add a rom of 16mbit in each slot, I put the cartridge in the console and there the drama!

No game is launched, worse I have display bugs on the screen and despite switching between the 2 slot nothing to do it does not work! Automatically return to the console menu...


Can someone tell me why?
I put the photos so that you see what I have on the screen.
Thank you in advance;




]]> https://forum.freeplaytech.com/showthread.php?tid=4681 Tue, 02 Oct 2018 16:44:02 +0000 mikapoil]]> https://forum.freeplaytech.com/showthread.php?tid=4681
Then, I have just received the Neo Pocket Flash Masta and wanted to try it...

But when i link it to my PC,nothing happens !
I have tried with 2 PC (Win7 64 and WIN7 32) and with 3 differents cables usb.

Nothing !
when i put it in USB port, no sound
In configuration panel nothing new
and with zadig no flash masta recognized

An idea ?]]>
Then, I have just received the Neo Pocket Flash Masta and wanted to try it...

But when i link it to my PC,nothing happens !
I have tried with 2 PC (Win7 64 and WIN7 32) and with 3 differents cables usb.

Nothing !
when i put it in USB port, no sound
In configuration panel nothing new
and with zadig no flash masta recognized

An idea ?]]> https://forum.freeplaytech.com/showthread.php?tid=4610 Sun, 29 Apr 2018 02:32:51 +0000 daphnedews]]> https://forum.freeplaytech.com/showthread.php?tid=4610 https://forum.freeplaytech.com/showthread.php?tid=4478 Wed, 18 Oct 2017 21:07:50 +0000 Morden]]> https://forum.freeplaytech.com/showthread.php?tid=4478 Fast And Fourier and INCA on real hardware. It's been ages since I've last used it, and I've upgraded to Win 10 x64. Last I used it was on Win 8, I think. I did go with an upgrade rather than clean install, so old stuff, drivers and all, is still present.

Anyway, I was getting some problems with the command line tool, and the old GUI wasn't detecting the cartridge at all, so I went with Zadig and FlashMasta_Win_64bit_1-21-16. The Flashmasta program seems to detect the cartridge, it lists the device as Neo Geo Link Masta, detects the currently flashed program, but under game title it says "official cartridge", which this is definitely not.

It allows me to dump the contents, but it won't allow me to write anything to the cartridge. Not even save files, which you can restore even with official cartridges. The "Flash Entire Cartridge" is grayed out, and there's a red X next to Flash Game Data.

Yes, I am using the flash cartridge and not an official game cartridge, so it's definitely not a simple mistake. The command line tool doesn't work either. It gives me info on the cartridge, but hangs when I try to write to it. Any ideas? I have the earlier cartridge without the manual bank switch, if that helps in any way.]]> Fast And Fourier and INCA on real hardware. It's been ages since I've last used it, and I've upgraded to Win 10 x64. Last I used it was on Win 8, I think. I did go with an upgrade rather than clean install, so old stuff, drivers and all, is still present.

Anyway, I was getting some problems with the command line tool, and the old GUI wasn't detecting the cartridge at all, so I went with Zadig and FlashMasta_Win_64bit_1-21-16. The Flashmasta program seems to detect the cartridge, it lists the device as Neo Geo Link Masta, detects the currently flashed program, but under game title it says "official cartridge", which this is definitely not.

It allows me to dump the contents, but it won't allow me to write anything to the cartridge. Not even save files, which you can restore even with official cartridges. The "Flash Entire Cartridge" is grayed out, and there's a red X next to Flash Game Data.

Yes, I am using the flash cartridge and not an official game cartridge, so it's definitely not a simple mistake. The command line tool doesn't work either. It gives me info on the cartridge, but hangs when I try to write to it. Any ideas? I have the earlier cartridge without the manual bank switch, if that helps in any way.]]>