no audio after trying to play thru hdmi - Printable Version +- Freeplaytech Forum (https://forum.freeplaytech.com) +-- Forum: Freeplay Zero / Freeplay CM3 / Game Pie Advance (https://forum.freeplaytech.com/forumdisplay.php?fid=24) +--- Forum: Freeplay Zero/CM3 (AKA GPA) Software (https://forum.freeplaytech.com/forumdisplay.php?fid=26) +--- Thread: no audio after trying to play thru hdmi (/showthread.php?tid=4707) |
no audio after trying to play thru hdmi - wade1234 - 12-09-2018 I connected my freeplay zero to the tv, and went into the audio section of retropie and selected HDMI output. I now no longer get any audio from the built in speaker or HDMI. I have gone back into that menu and selected auto and also default with no changes. How can I get audio to play on the built in speaker again? RE: no audio after trying to play thru hdmi - Flavor - 12-09-2018 After switching it back, try rebooting with the HDMI unplugged. Then, if the speaker is working fine, plug the HDMI back in. RE: no audio after trying to play thru hdmi - Flavor - 12-09-2018 By the way, if you want audio output through the HDMI, edit the /boot/config.txt file and change hdmi_drive=1 to hdmi_drive=2 Then, what you did originally will likely work to get HDMI output (or may just work if you boot up with HDMI plugged in since you have it set to auto). RE: no audio after trying to play thru hdmi - wade1234 - 12-09-2018 (12-09-2018, 06:32 AM)Flavor Wrote: After switching it back, try rebooting with the HDMI unplugged. Then, if the speaker is working fine, plug the HDMI back inok, that restored audio to the built in speaker Thank you. If I change the config.txt HDMI exception line will I need to modify it everytime I want to switch from the tv to built in audio? RE: no audio after trying to play thru hdmi - Flavor - 12-09-2018 (12-09-2018, 06:36 AM)wade1234 Wrote: ok, that restored audio to the built in speaker Thank you. If I change the config.txt HDMI exception line will I need to modify it everytime I want to switch from the tv to built in audio? No, you should not. It's mainly there to make the HDMI also work on monitors that do not support audio (which is getting more rare I think). RE: no audio after trying to play thru hdmi - wade1234 - 12-09-2018 (12-09-2018, 06:43 AM)Flavor Wrote:(12-09-2018, 06:36 AM)wade1234 Wrote: ok, that restored audio to the built in speaker Thank you. If I change the config.txt HDMI exception line will I need to modify it everytime I want to switch from the tv to built in audio? That all worked thank you for the help, I really like the product and will recommend it to my friends! RE: no audio after trying to play thru hdmi - safe_as_milk - 02-21-2019 I figured I'd just piggyback on this thread as i am experiencing the same issue . I uncommented hdmi_drive=2 in my config file. When I plug the HDMI in and fire up the device the speaker disengages but no sound comes out of the tv. Any other ideas on how to get audio working? I've messed around with a lot of different sound settings to no avail and now i get a message failed to find mixer element. RE: no audio after trying to play thru hdmi - Flavor - 02-23-2019 There's a bunch of RetroPie audio info at https://github.com/RetroPie/RetroPie-Setup/wiki/Sound-Issues (02-21-2019, 06:20 PM)safe_as_milk Wrote: I uncommented hdmi_drive=2 in my config file. Do you have multiple hdmi_drive lines in your config, by any chance? If you just uncommented that, there is likely hdmi_drive=1 later in the config. |