08-01-2019, 05:07 PM
I ran into a similar issue but mine was related to the headphone jack. Whenever I would plug in a pair of headphones the screen would occasionally go dark. I found that I could make it happen by applying a tweaking pressure to the plug.
I took the unit apart and reseated the display ribbon into the connector on the board and that fixed it. It must have been slightly loose or misaligned and the small flexing of the circuit board would cause it to lose connection.
I took the unit apart and reseated the display ribbon into the connector on the board and that fixed it. It must have been slightly loose or misaligned and the small flexing of the circuit board would cause it to lose connection.