10-24-2019, 03:59 AM
(10-23-2019, 05:26 PM)Porcinus Wrote: The only help I can give you is on Windows, I hope I will not say too much crap, I am not at home right now and on my phone :S
To do both stuff, you need to be connected thru WiFi, once done get the CM3 IP via Retropie > Wifi menu on main screen.
You will need to download 2 softwares:
- Putty : used to send commands to the CM3.
- WinSCP : to interact with Linux filesystem on the device.
Default connection port is 22.
On Putty, set connection type to SSH, I highly recommend you to save the configuration for both software, it is always useful.
For WinSPC, set it to SCP.
Default login credential on the system is :
User : pi
Pass : raspberry
Once connected, on Putty enter command 'sudo dmesg > /home/pi/dmesg.txt' then Enter.
On WinSCP, go to '/home/pi' on right column, you should see 'dmesg.txt', copy it somewhere on your computer, you will have to attach this file here.
Then go to '/var/log/' and do the same thing with 'daemon.log'.
Quick note: You can add roms by going to '/home/pi/Retropie/roms' then go into the right folder and copy rom files, you will need to restart EmulationStation to have them showing.
This link could help a bit if you have some troubles with previous steps : https://github.com/RetroPie/RetroPie-Setup/wiki/SSH
To attach files here, select 'Preview Post' on the bottom right of the page, then 'Add attachment' and voila
Thank you! I really appreciate it. Unfortunately I can't get WiFi on my pi right now, I need to buy a dongle that will work. Once I get that I'll come back and do this.