Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Scripts installation on retropie 4.6 (buster)
#1
Hi, I want to install the scripts on retropie 4.6 which is based on raspbian buster but when I run the installation script from https://github.com/TheFlav/Freeplay-Support the cm3 doesn't boot up.  Could someone explain to me what I am doing wrong or what should I do? 

The reason why I want to do it is because I can't install the Realtek drivers for the WiFi dongles I have, or I have errors and it won't let me install it, although in raspbian stretch it shouldn't because of what I've read ...

Thanks in advance
Reply
#2
I found that in the install.sh script at https://github.com/TheFlav/Freeplay-Support there are a couple of errors on two lines. On lines 25 and 26 you should put nonint instead of noint. This causes raspi-config to start in interactive mode.

On the other hand I also found in the install.sh script from https://github.com/TheFlav/rpi-fbcp that after copying fbcp.sh to /etc/init.d you should give execution permission, at least that returns the system by doing it by hand...
Reply
#3
(07-11-2020, 08:25 PM)Julenvitoria Wrote: I found that in the install.sh script at https://github.com/TheFlav/Freeplay-Support there are a couple of errors on two lines. On lines 25 and 26 you should put nonint instead of noint. This causes raspi-config to start in interactive mode.

This is a really good find. I wonder why we have never noticed it before. I guess that the boot wait wouldn't break anything, but the i2c could cause the backlight control to fail. Weird. Thank you very much for noticing that!

(07-11-2020, 08:25 PM)Julenvitoria Wrote: On the other hand I also found in the install.sh script from https://github.com/TheFlav/rpi-fbcp that after copying fbcp.sh to /etc/init.d you should give execution permission, at least that returns the system by doing it by hand...

It should be executable. You are right. When I 'git clone' the repo, it is already executable. I added in a chmod for you, so it will be sure to get the permission. I don't know why it didn't already have it for you.
Card Fighters' Clash 2 English Translation ( http://cfc2english.blogspot.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ )
Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)