11-08-2018, 12:33 PM
You can have both, stevo619.
This isn't a problem at all, but we should have been more aware that you ordered the L2/R2 add-on and then not soldered on the brightness controller before shipping. They can both be soldered to the same points.
We should have left the brightness unsoldered, because then it's easier to solder in the pins for the L2/R2 board first and then add the brightness wires.
You can just heat up those through-holes (44/45) and remove the wires. Then solder in the pins for the add-on board. Then, after you have the L2/R2 add-on all in place, you can just tack the wires onto the solder points.
Let us know how that goes.
This isn't a problem at all, but we should have been more aware that you ordered the L2/R2 add-on and then not soldered on the brightness controller before shipping. They can both be soldered to the same points.
We should have left the brightness unsoldered, because then it's easier to solder in the pins for the L2/R2 board first and then add the brightness wires.
You can just heat up those through-holes (44/45) and remove the wires. Then solder in the pins for the add-on board. Then, after you have the L2/R2 add-on all in place, you can just tack the wires onto the solder points.
Let us know how that goes.
Card Fighters' Clash 2 English Translation ( http://cfc2english.blogspot.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ )
Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ )
Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )